This page contains the Samsung B315E flash file as well as the flash tool (Samsung Guru Music 2 b315e Flash File). The hang on logo or bootloop issue will be completely resolved with this flash file (firmware). The Sim lock or security lock (password) will also be removed by flashing.
The Samsung B315E Guru Music 2 is a feature phone with a Spreadtrum (SPD) processor (CPU). We'll need to install spd drivers to connect the Samsung B315E to the computer for flashing.
The Research Download Tool is used to flash the Samsung B315E. (Samsung Guru Music 2).
You will find a link to download the Samsung Guru B315E flash file on this page (stok rom). After downloading the rom for the Samsung B315, save it to your computer and flash it on your Samsung B315E.
The Samsung B315E can be flashed to fix software issues like hanging, logo hanging, and not working properly. By flashing your Samsung B315E with the correct flash file, you can also unlock the password or SIM lock. Keep in mind that flashing your mobile devices will erase all of your data, so make a full backup first.
Samsung B315E Guru Music 2 Flash File (Stock Rom) With Flash Tool Tested
Samsung B315E Phone Lock ?
- First Of All Download The Zip File
- Install Spd Usb Driver
- Open Flash Tool And Select Flash File
- Tap On Start
- Connect Mobile While Press Boot Key
- Wait For Flashing About 2 Minutes
- When Flash Success Appear On Your Computer Disconnect Mobile And Boot In Normal Mode
- Now Samsung B315E Phone Lock Is Remove Successfully And Also Sim Lock
Samsung B315E Flash File To Flashing Steps.
- Install the Samsung B315E firmware (Samsung Guru B315E guru music 2 firmware), SPD USB drivers, and the Research Download tool on your computer.
- Make sure your phone's battery is at least 50% charged before flashing.
- To extract the file, use 7zip or WinRAR.
- Install your device's drivers on your computer now.
- Your Samsung b315e computer should be turned off.
- Begin the flashing programme.
- Open the flash file in the flash tool.
- Press the start button to get started.
- While inserting the USB cable, turn off the phone and press and hold the middle OK key.
- The flashing will begin immediately.
- Please be patient, as the flashing may take a while to finish.
- When you're done, the phone will automatically restart.
- The flashing is now complete, so congrats.
- Now disconnect the USB cable and have a good time.
 With Flash Tool Tested){kind=link}
0 Comments