Tecno Spark 8P KG7 Frp File & Pattern Unlock Using SP Tool


Official Stock Flash Firmware Now Available for the Tecno Spark 8P KG7 Frp
File & Pattern Unlock
. This firmware can be used to solve any software
issues in your Tecno Spark 8P KG7, such as fastboot Mode, and FRP lock. It
also allows you to display blank or white after flashing, uneventful recovery,
dead after Flash, etc.

DownloadTecno Spark 8P KG7 Frp File & Pattern Unlock From Here.
The given
firmware file from Tecno was the first one and is contained in the scatter
file. This file tells you how to flash it, and the driver installs it using
this SP Flash program. Here’s how to Flash Tecno Phone with a Scatter file.
The file is explained below in complete detail. How to Flash Manual.

Download Tecno Spark 8P KG7 Flash File

Software Version

Flash File Name: KG7-H6913HIJL-R-OP-210827V159

File Size: 2.6 GB

OS: Android 11, HIOS 7.6

Flash File Name: KG7n-H6913K-R-OP-210827V168

File Size: 2.6 GB

OS: Android 11, HIOS 7.6

How to Unlock Pattern & Frp Lock In Tecno Spark 8P KG7:

  • Download all of the Documents in the above links if the link is not

  • Only leave your comment on below comment box

  • Install WinRAR software on your Pc or laptop to Get extract downloaded

  • Extract all Document and Then paste into desktop

  • Initial Install libusb win32 devel filter OR MediaTek USB Notebook
    and after that Reboot (Restart) Computer

  • Open MCT MediaTek USB Driver Tool Click BYPASS

  • Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable

  • Wait Until Improving

  • When Done Disable Protection, You can Watch like Below Picture

  • Open SP flash Instrument Click Scatter-loading Select button and Choose
    Android_scatter Document

  • Click Download-Agent and Select MTK_AllInOne_DA.

  • Go to Option ► Connection and Set Com Port (COM:3) and Baud Rate (921600)

  • Now Open Device Manager and Check Your Phone Com Port (Check below Image for
    more Information)

  • Now go to Userdata Format Tab and click to Manual flash


physical_start_addr: 0x3208000

partition_size: 0x100000


physical_start_addr: 0x1e0000000

partition_size: 0xc0000000

  • Click on the Start button

  • Wait Until Completed.

Post a Comment