In this post you will know that if you flash Samsung e1200y No Network After Flashing and and you can see mobile network will be erased so you flash file provided flash file and now your network problem will be solved network will also return
I can test the flash file in my mobile and problem was solved so you use my method and your problem will be gone.
How to the problem samsung e1200y no network after flash.
Step 1: Download Miracle Thunder 2.82 Tool And Provided Flash File (Stock Rom)
Step 2: Download And Install SPD Usb Driver
Step 3: Disable Antivirus And Change Date To 2018 or 2017 Set The Time Zone On Your Pc
Step 4: Open Flash Tool Select Flash File And Flash Your Mobile
Step 5: Remove Battery And Reconnect And Connect Mobile With pc Via Using Boot Key (Ok) Botton
Step 6: Wait For Flashing Done
About Miracle Thunder 2.82: Miracle Thunder Tool Is A Simple China Mobile Flashing Tool And Samsung Mobile (Only SPD)
With the help of this tool you can flash the mobile, remove the lock and repair IMEI it
About Samsung SPD Driver: With the help of SPD Usb Driver, you can boot any SPD mobile and connect with your Pc.
Good News Nokia TA-1203 FIRMWARE is Avi
Readme Also:
i remember you again: make sure backup your mobile data like phone call logs, messeges,
NVDATA\NVRAM This backup is very important (MAKE SURE BACKUP) And if you did not make a backup, both you and the network can go to backup
Nokia TA-1010 UsbDriver
So that's why take care of this
Name: Miracle Thunder 2.82 100% Working
Size: 713.1MB
Link:
Name: Samsung e1200y Network ok
Size: 8MB
Lnk:
Name: Samsung SPD Usb Driver
Size: 5MB
Link:
0 Comments